B&W Plugins Suite for PTC Creo (rev.20220706)


B&W Plugins Suite for PTC Creo  | 2.3 Gb

B&W Software, the leading global provider of add-on applications for the 3D-CAD System Creo Parametric, has unveiled updated plugins suite 2021 (rev.02032022). Run routine tasks quick and accurately, process automation for design tasks or optimizing user interaction – B&W products provide a fitting solution.

B&W Software is the leading global provider of add-on applications for the 3D-CAD System Creo Parametric. Since many years B&W develops specially tailored software solutions to increase efficiency in the field of product design.

Industry solutions – from design to manufacturing – raise the bar while using Creo Parametric. As a strategic PTC partner B&W software products are fully integrated into the Creo Parametric system and are marketed through PTC channels.

Our industry solutions for mold base and progressive die design (EMX, PDX), framework design (AFX) and the intelligent fasteners application (IFX) are fully integrated modules of Creo Parametric.

The extension and customizing of your CAD environment by B&W software for intelligently automating routine tasks lead to cost saving and increased productivity. Furthermore you will increase most quality aspects of your products, cut down development cycles and create room for new ideas and perspectives.

Permanent evolution, forward-looking prospects and a sustainable knowledgebase – based on a long expertise – made B&W a leading provider of automation processes for Creo Parametric.

SMART3DExport
SMART3DExport is the solution for transform your 3D model into a printable 2D PDF.
SMARTAnnotate
SMARTAnnotate applies your standard texts, symbols and metadata to drawings and 3D models quickly and accurately. Extensive management mechanisms allow you to maintain control of the content at all times
SMARTAssembly
Harmonize and document your design processes while reducing repetitive tasks at the same time. SmartAssembly supports your design process sustainably.
SMARTColor
SMARTColor helps you to provide machine-readable product and manufacturing information (PMI) through the rule-based application of predefined colors.
SMARTElectrode
Create your sinking electrodes in a parametric world! The fully integrated software solution SMARTElectrode will speed up your design tasks in this area.
SMARTHolechart
SMARTHolechart relieves you of the hours of work involved in adding drilling information and offers intelligent creation of hole charts. Rotational geometries are recognized automatically and hole types can be classified individually.
SMARTMenu
B&W Software did not create product overview for this plugin.
SMARTOptics
The optical analysis software SMARTOptics simplifies the layout of optical components like mirrors and lenses and helps you to determine discontinuities. Inspection of the field of view can be easily analyzed with SMARTOptics and the needed luminosity is calculated and visualized within the assembly automatically.
SMARTXHatch
Easily define X-hatch properties within assembly drawings and update only with just a single push on the button! Especially in your drawings of large tool assemblies, SMARTXHatch speeds up your cross-hatching definition of section views significantly.
SMARTUpdate
SMARTUpdate checks your assemblies, parts and drawings using a set of predefined rules. Based on the check results, the software repairs and updates your data reliably and automatically.
SMARTDesignServer
SmartDesignServer coordinates the distributed processing of SmartAssembly programs on multiple cores throughout your network. Additionally, you may use SmartDesignServer to create individual user interfaces like a web configurator.

B&W Software is the leading global provider of add-on applications for the 3D-CAD System Creo Parametric. Since 1997 B&W develops specially tailored software solutions to increase efficiency in the field of product design.

Based in Erlangen (Germany), but known around the world and used in diverse industries.

Product: B&W Plugins Suite
Version: for PTC Creo  *
Supported Architectures: x64
Website Home Page :
Language: english
System Requirements: **
Software Prerequisites: Pre-install PTC Creo 2.0-8.0
Size: 2.3 Gb

* release info:

Smart3DExport 4.2.0.0 for Creo Parametric 4.0-6.0

Smart3DExport 7.1.4.2 for Creo Parametric 7.0

Smart3DExport 8.0.2.0 for Creo Parametric 8.0

SmartAnnotate 3.5.7.0 for Creo Parametric 2.0-3.0

SmartAnnotate 4.6.3.0 for Creo Parametric 4.0

SmartAnnotate 5.4.2.0 for Creo Parametric 5.0

SmartAnnotate 6.2.2.0 for Creo Parametric 6.0

SmartAnnotate 7.0.2.0 for Creo Parametric 7.0

SmartAnnotate 8.0.0.0 for Creo Parametric 8.0

SmartAssembly 6.0 M130 for Creo Parametric 2.0-6.0

SmartAssembly 8.0.2.0 for Creo 4.0-8.0

SmartColor 4.3.3.1 for Creo Parametric 4.0

SmartColor 5.3.3.1 for Creo Parametric 5.0

SmartColor 6.3.3.1 for Creo Parametric 6.0

SmartColor 7.0.3.0 for Creo Parametric 7.0

SmartColor 8.0.1.0 for Creo Parametric 8.0

SmartDesignServer 6.0 M120 for Creo Parametric 2.0-6.0

SmartDesignServer 8.0.0.0 for Creo Parametric 4.0-8.0

SmartElectrode 10.0 M081 for Creo Parametric 2.0-4.0

SmartElectrode 11.0.2.0 for Creo Parametric 3.0-5.0

SmartElectrode 12.0.8.0 for Creo Parametric 4.0-6.0

SmartElectrode 13.0.4.0 for Creo Parametric 7.0

SmartElectrode 14.0.2.0 for Creo Parametric 8.0

SmartHolechart 10.0 M016 for Creo Parametric 2.0-5.0

SmartHolechart 12.0.4.2 for Creo 4.0-6.0

SmartHolechart 13.0.1.2 for Creo 7.0

SmartHolechart 14.0.1.2 for Creo 8.0

SmartLibrary 7.0.4.0 for Creo Parametric 7.0

SmartLibrary 8.0.1.0 for Creo Parametric 8.0

SmartMenu 9.0 M030 for Creo Parametric 2.0-4.0

SmartMenu 10.0.1.0 for Creo Parametric 4.0-5.0

SmartMenu 11.0.0.0 for Creo Paeametric4.0-6.0

SmartMenu 12.0.1.0 for Creo Parametric 7.0

SmartMenu 13.0.0.0 for Creo Parametric 8.0

SmartOptics 6.0 M013 for Creo Parametric 2.0-4.0

SmartOptics 7.0.4.0 for Creo Parametric 4.0-6.0

SmartOptics 7.1.2.0 for Creo Parametric 7.0

SmartOptics 8.0.1.0 for Creo Parametric 8.0

SmartUpdate 8.0 M010 for Creo Parametric 2.0-4.0

SmartUpdate 9.0.0.0 for Creo Parametric 4.0-6.0

SmartUpdate 10.0.0.0 for Creo Parametric 7.0

SmartUpdate 11.0.0.0 for Creo Parametric 8.0

SmartXhatch 8.0 M120 for Creo Parametric 2.0-4.0

SmartXhatch 10.0.2.0 for Creo Parametric 4.0-6.0

SmartXhatch 11.0.1.0 for Creo Parametric 7.0

SmartXhatch 12.0.0.0 for Creo Parametric 8.0

Compatibility: Pre-installed PTC CREO Parametric 2.0-8.0 Win64 with crack from SSQ. When running B&W Plugins 2021 Suite in the PTC Creo 2.0 – 8.0 platforms, the minimum requirements are superseded by the minimum requirements listedfor those platforms.


Password/解压密码:caxfwz

0

评论0

请先

显示验证码
没有账号?注册  忘记密码?