Cadence Design Systems Analysis Sigrity 2021.1破解版下载

920f2dedb8e0
Cadence Design Systems Analysis Sigrity 2021.1(x64)
x64 | 语言:英语| 档案大小:5.61 GB
Sigrity 2021软件,用于高频电路中的仿真和信号完整性。随着数字处理技术的进步,对更快处理的需求也日益增长,Prdzashgrhayy迫切需要以更高的处理速度和更高的频率工作更快的电路。通过提高速度信号以准确加快安装在电路板PCB或电路板上层压板上的路线上的信号,以及在现场情况下出现新问题的情况,卡住的工程师将面临诸如干扰,失真和噪声以及高信号完整性等事件。频率导致受到威胁。为了最大程度地减少这些威胁,进行补偿并提高高速电路的质量,需要分析和采取纠正措施,Allegro Sigrity软件对我们而言非常方便。

该软件旨在在初始阶段检查各种情况,从而使准确的设计和重新设计的可能性降至最低。该软件支持直接在Allego数据库的PCB和IC设计上进行读写。基于SPICE的精确模拟器以及用于2d和3d的内置求解器可以提取用户。该软件还对晶体管级输入和输出功能进行了建模,包括对功耗的IBIS 5.0支持。


To minimize these threats, compensate them and increase the quality of high-speed circuits, needs analysis and corrective actions that the software Allegro Sigrity it is convenient for us. The software combines technology with design, editing and routing IC and PCB coordinate Cadence® Allegro® enables advanced analysis of both pre-layout and post-layout provides for users.

The software is designed to examine various scenarios in the initial phases allows accurate design and redesign minimized. This software supports reading and writing directly on the PCB and IC design of Allego’s database. Accurate simulator based on SPICE as well as built-solver for 2d and 3d extracts the user. The software also modeling the transistor-level input and output functions include power-aware IBIS 5.0 support.

Features and Applications Allegro Sigrity:
-Perform a wide range of SI analysis or Signal integrity (signal integrity)
-Early detection of design errors to increase success in the early phases
-Restrictions can be set quickly and accurately apply the basic processes
-Improve product performance through exploration and space solutions
-Evaluation of alternative topologies in infancy
-Production of S parameters of the topology and signal analysis in the form of parameter S
-Tables estimate interference designed to increase productivity
-Was approved after PCB design and IC design directly on boards
-Multiple evaluation and confirmation signals for different paths on silicon boards

Sigrity 2019 Release Accelerates PCB Design Cycles by Integrating 3D Design and 3D Analysis:

Interconnect Modeling Technology:
-Upgraded interconnect modeling technology addresses latest trends on PCB and IC package design.With signal speeds climbing to 32Gbps and faster, the need to strategically model PCBs and connectors as one structure is now required. The new Cadence® Sigrity™ 3D Workbench, included with the Sigrity PowerSI 3D EM Extraction Option (3DEM), allows users to import mechanical structures, such as cables and connectors, and merge them with the PCB. This way critical 3D structures that cross from the board to the connector can be modeled and optimized as one structure. Updates to the PCB can be automatically back-annotated to the PCB layout tool.

The 3D Workbench offers:
-SI and PI applications
-A familiar 3D look and feel
-Ability to import mechanical structures
-Ability to import electrical databases and merge with mechanical structures
-3D solid modeling (parametric and full featured)
-Simulation of:
-Twisted pair wiring (cables)
-Backplane plus connectors
-Connector modeling (HDMI, SATA, etc.)
-SMA connector on a PCB

Rigid-Flex Support:
Industry-first full Rigid-Flex PCB extraction from a single layout database provides accurate interconnect modeling of both rigid and meshed-ground flex cable zones. The zone information is automatically imported from version 17.2 of Cadence Allegro® technology.

Faster IC Package Modeling:
-IC package modeling of designs with thousands of bumps/balls is now 3X faster and memory consumption has been reduced by 75 percent.

Power Integrity Updates:
-Upgraded power integrity (PI) technology addresses new checking requirements and new usability requirements for PCB front-to-back design flows. Many enhancements have been added, including hierarchical views, quick search, and filtering, comparison tree report, and tool tips.

Allegro PowerTree™ technology:
-The DC analysis technology has been upgraded to support integration with Allegro technology, HTML block-diagram enhancements, and automated add-nodes-on-pads enhancements.

Sigrity PowerDC™ technology:
-The AC analysis technology has added some additional checks that now look at the weighted AC current and checks for equal voltage. New batch-mode “projects” allow these two new workflows as well as others to be setup as a set of batch checks.

Sigrity OptimizePI™ technology:
-Upgraded signal integrity (SI) technology accelerates the time it takes to verify memory interfaces, serial links, and the plethora of other signals on a PCB that can cause a design to fail in the lab. The technology now features workflows and visions that can be used to quickly perform electrical rule checks that find impedance variations and excessive coupling. These checks require no models and can be run by both expert and non-experts in signal integrity.

System Requirements:
OS:Microsoft® Windows® 7 all versions (64-bit), Windows 10 (64-bit), Windows 2012 Server (All service packs), Windows 2016 Server (All service packs).
Note:Note: Clarity 3D Solver and Celsius with Hyper-V are not supported on Windows 7.
CPU:Intel® Core™ i7 4.30 GHz or AMD Ryzen™ 7 4.30 GHz with at least 4 cores
RAM:8 GB RAM / 64 GB RAM or higher
Space:50 GB free disk space / 500 GB free disk space SSD is recommended for primary operating system (OS) and simulation working directory
Internet:Microsoft® Internet Explorer® 9.0 or later
Display:1,024 x 768 display resolution with true color (16bit color) / Large monitor (or two) with Full HD resolution or higher
GPU:Dedicated graphics card with 1 GB video memory or higher

系统要求:

操作系统:Microsoft®Windows®7所有版本(64位),Windows 10(64位),Windows 2012 Server(所有服务包),Windows 2016 Server(所有服务包)。
注意:注意:Windows 7不支持带有Hyper-V的Clarity 3D Solver和
Celsius。CPU:至少具有4个内核的Intel®Core™i7 4.30 GHz或AMD Ryzen™7 4.30 GHz
RAM:8 GB RAM / 64 GB RAM或更高
空间:建议将50 GB可用磁盘空间/ 500 GB可用磁盘空间SSD用于主操作系统(OS)和模拟工作目录
Internet:Microsoft®InternetExplorer®9.0或更高版本
显示:1,024 x 768真彩色显示分辨率( 16位色)/大型显示器(或两个)全高清分辨率或更高
GPU:独立显卡拥有1GB显存以上的

安装激活教程:

建议下载和安装之前关闭防火墙和杀毒软件,安装的时候断开网络。

-删除旧版本

-安装SIG21.10.000并安装许可证管理器20.01-p001
-安装“产品安装”并使用默认设置安装应用程序
-将“ LicenseManager”文件夹复制并替换到“ C: Cadence ”,然后运行“ LicenseManagerPubKey.bat”
-将“工具”复制并替换到“ C: Cadence Sigrity2021”,然后运行“ ToolsPubKey.bat”,等等…!
-将“ License.dat”复制到“ C: Cadence LicenseManager”
-在“ C: Cadence LicenseManager ”中,打开“ LicenseServerConfiguration.exe”,然后指向“ License.dat”(单击“下一步”,然后单击“完成”)

-在“ C: Cadence LicenseManager”中,使用编辑器打开“ license.dat”,并在“ DAEMON cdslmd”之后仅删除拖曳行

服务器本地主机ANY 5280
达蒙cdslmd
“ C: Cadence SPB_17.2 LicenseManager cdslmd
.exe“端口= 3000

将:

服务器本地主机ANY 5280
达蒙cdslmd

-在“ C: Cadence LicenseManager”中打开“ lmtools.exe”,选择“启动/停止/重新读取”​​选项卡,然后单击“停止服务器”,然后单击“启动服务器”

几条注释作者:WhiteDeath
所有产品的许可证更新2021.1 Sigrity / Analysis。(此许可证上不提供Clarity 3D Transient Solver。)
2)确保您有超过19GB的大量空间

创建者:WhiteDeath-2021-

百度网盘下载:

本站解压密码:caxfwz

资源下载
下载价格5
注意:不用注册、不用登陆,点击任意一个支付即可全部解锁。免登陆付款有效期24小时。VIP用户所有资源免费。支付过程中有任何问题。请联系客服QQ3117203365。 paypal支付指南
0

评论0

请先

显示验证码
没有账号?注册  忘记密码?